For over 60 years MacKissic has been manufacturing tough, durable products for the lawn & garden industry.

 

STUMP CUTTER

Stump Cutter Action

Peels

CPSC

Our compact stump cutter features a patented cutter head system that cuts like a router rather than grinding the stump.  This allows our machine to be smaller as there is virtually no resistance to the cutter head.  Another unique feature is our reversible handle that allows cutting from either end, but the big advantage of operating from the cutter end is you have total visibility of the cutter head and the stump.  When you flip the handle the handle you then can access stumps located against a fence or a building that would not allow access with the handle at the cutter end.  We also feature the only brake clutch system that virtually stops the cutter head in under two seconds when the operator presence handle is released; this is significantly safer than traditional centrifugal clutches. 

SPECS:

  • Engines:  Briggs & Stratton 13.5 gross torque OHV IC, 9 hp Robin, 8 hp Honda

  • Brake:  6” disc with mechanical caliper operated from handle bar with push button lock. Exclusive braking system stops the cutter head in less than 2 seconds

  • Cutter head:  Patented U.S. and Canada, set 30 degrees off vertical; 9 carbide double-locked teeth

  • Handle:  Adjustable to operator’s height and reversible, front or rear

  • Tires:  13” x 5” pneumatic, turf style

  • Dimensions:  Width 25” / length front position 73”; rear position 88” / height 41”

  • Weight:  255 lbs.

  • Construction: Stronger uni-body frame construction

  • Storage: Rear kickstand to keep cutter head elevated during storage or transportation, also doubling as a cutter head guard. Front bumper protects engine and provides a strong handle for lifting

SPECS: PATENTED CUTTER        HEAD

1. The Cutter Head set 30 degrees off vertical when mounted on shaft allows cutter to work much like a router.  It discharges chips quickly.  This along with the unique 45 degree, 25 degree, and straight configuration of the cutting teeth enables very low horsepower. to achieve the same end result of much larger machines.
2. The weight of the complete cutter head and small diameter act like a flywheel allowing very fast and smooth cutting. 
3. Unique sequence of cutting teeth allows cutting in all directions.
4. Easy On-Off of complete head allows changing or sharpening of teeth with very little down time.
5. No ruler or gauge needed to install cutter teeth
6. Double locking system to hold teeth in place.  Ridge groove mating system plus compression of cover plate for added safety
7. Automatic, self aligning cutter head to shaft assures perfect balance.
8. Cap screws for cover plate are recessed to avoid damage from foreign objects.